Exclusive to Techcam

Crawlers

Control Panels

Manual Reels

Automatic Reels

Cameras

Crawlers

iPEK crawlers are suitable to inspect pipelines from DN 100 up to DN 2000 mm.  A large variety of modular accessories allows adjustment of the crawler configuration for the execution of many different inspection tasks. What all crawlers have in common is their robust design for use under adverse conditions, the intuitive operability and the quality construction, which has continuously been improved over decades in close cooperation with operators and customers.

The application area of the RX400 crawler ranges from DN 400 up to DN 1300 (optionally up to DN 2000)

Crawler

RX400

RX400 with extension

RX400 with Jumbo Wheels

RX 400

  • Application area ranging from DN 400 up to DN 1300 (optionally up to DN 2000)

  • Powerful four-wheel drive (steerable) 

  • Electrically operated 2-speed gearbox

  • Electrically operated clutch with safety mode = clutch is permanently engaged

  • Large ground clearance

  • Automatic lifter

  • Sensor system for automatic camera centering

  • inside the pipe

  • Location transmitter can be activated

  • Constant monitoring by pitch and roll sensor

  • Constant monitoring of the internal pressure and temperature

  • 4 manually adjustable LED lamps for optimum illumination of the pipe (LEDs cannot be adjusted manually with the EX version)

  • 2 LED lamps for optimum illumination of the pipe bottom

  • Integrated backeye camera

  • Interface for additional backeye camera in an elevated position

  • Interface to mount an optional elevator extension

  • Compatible to the SUPERVISION®(PAL) - inspection system (with reduced scope of functions, e.g. no electrical gearshift, no safety mode, no camera centering)

Downnload the latest

RX400 Sales leaflet

 

The application area of the RX130 crawler ranges from DN 150 up to DN 1000 (with elevator and carrier mounted).

RX 130

RX130

  • Powerful six-wheel drive (steerable) 

  • Location transmitter can be activated

  • Crawler wheels for all surface conditions

  • Constant monitoring by pitch and roll sensor

  • Constant monitoring of the internal pressure and temperature

  • Integrated backeye camera

  • Optional automatic elevator

  • Optional carrier

  • Optional auxiliary light

  • Compatibility to the SUPERVISION®-(PAL) 

  • Inspection System (as of version 2012) and PAL video format

Downnload the latest

RX130 Sales leaflet

 

RX130 with elevator

Crawler RX130

The application area of the RX95 crawler ranges from DN 100 up to DN 200.

RX95 with RAC50

RX95 with PTP70II

RX 130

  • Powerful six-wheel drive (steerable) 

  • Location transmitter can be activated or switched over

  • Crawler wheels for all surface conditions

  • Constant monitoring by pitch and roll sensor

  • Constant monitoring of the internal pressure 

  • and temperature

  • Compatibility to the SUPERVISION®-(PAL) 

  • Inspection System (as of version 2012) + PAL video format

     

     

     

     

     

     

     

     

     

Downnload the latest

RX95 Sales leaflet

 

RX95

Control Panels

 

Inspecting pipelines with the iPEK multi-functional control panels is fun! Special features such as ergonomic and aesthetic design, intuitive handling and high-quality workmanship support you in managing all inspection tasks with ease. Whether you choose the mobile VC500 control panel or the DCX5000 Desktop Control Unit for installation into vehicles: you will always have your inspection system under control without difficulty.

DCX5000

OPERATOR PANEL CUSTOM-BUILT VEHICLES & CORE CONTROL UNIT

  • Core control unit for custom-built vehicles – optimally prepared for all inspection requirements 

  • Multi-functional control panel with ergonomic design for effortless working

  • Compact or customized arrangement of operating elements at your work place for maximum operating comfort

  • Handy 3-axis-joysticks with push-function for precise control of all crawler and camera functions incl. zoom

  • All important control elements are arranged within the reach of your fingers to ensure a smooth inspection.

  • Touch-screen monitor for operating the system and for optimally monitoring the system status. In connection with the frame the monitor can be tilted and the operating elements can be arranged in a compact manner.

  • Linux-operating system for a high degree of data security and a fast system start

  • All current interfaces at the CCU I „on Board“

Manual Reels

 

RMX200

MANUAL CABLE REEL UP TO 200 M

         Max. 200 m robust camera cable

  • Adjustable brake

  • Hand crank

  • Dirt wiper*

  • Winding support

  • Telescopic bar with control panel mount*

The ROVION pipeline inspection system is equipped with a manual cable reel with a 200 m solid camera cable. The cable reel holds max. 200 m of robust camera cable and offers winding support to allow the camera cable to be wound up to the cable reel quickly and cleanly. Additionally, you can mount your control panel to the optional telescope bar during an inspection (*RMX200 Only).

RLX200

MANUAL CABLE REEL UP TO 200 M

Max. 200 m robust camera cable

  • Adjustable brake

  • Hand crank

  • Winding support

RLX200/RMX200

EXTENSION CABLE REEL RLX200/RMX200 (SET) UP TO 2X200 M

Pipes which cannot be reached easily can be inspected from the inspection vehicle by using this set of reels. The set consists of a modified RLX200 cable reel and a modified RMX200 cable reel with up to 200 m of camera cable each. The manual cable reel RLX200 serves as an extension reel for the manual cable reel RMX200. The control panel is connected to the RLX200 and the crawler to the RMX200. Using a switch the RMX200 can be used either in extension reel mode or in stand-alone mode. Both manual reels are made for portable applications and ensure high stability.

RMX100

MOBILE CABEL REEL UP TO 100 M & CONTROL CASE

The mobile inspection system RMX100 is particularly suitable for the inspection of manholes and pipeline systems where space is limited or access to the inspection site is difficult. Depending on the crawler and camera used its application range starts at DN 100; cable length is 100 m.

To achieve the required flexibility and mobility a complete inspection system can be integrated in just two cases. The control case ERMX100 accommodates the built-in control electronics for the cable reel and a mount for the iPEK operating panel VISIONCONTROL VC200. The second case, the drum case, contains the removable manual cable reel RMX100 with 100 m of high-tensile camera cable.


Additionally the drum case provides space for the storage of a small crawler with camera and additional accessories.

For convenient transportation of the mobile inspection system RMX100 to the inspection site, the drum case is designed as plastic trolley with stable rollers and a telescopic rod. The control case ERMX100 can be placed above the drum case and attached to the trolley for transportation.

Automatic Reels

 

RAX300

AUTOMATIC CABLE REEL UP TO 300 M

Automatic cable reel for the ROVION inspection system. The cable reel holds max. 300 m of solid camera cable and offers winding support. The winding speed and the pulling force is infinitely variable.

  • Max. 300 m of extremely solid camera cable

  • Meter counter

  • Radio remote control

  • Invert mode

  • Winding aid

RAX500

AUTOMATIC CABLE REEL UP TO 500 M WITH CONTROL UNIT CCU II

Automatic cable reel for the ROVION inspection system. The cable reel holds max. 500 m of solid camera cable and offers winding support. The winding speed and the pulling force is infinitely variable. The control unit CCU II serves as power supply and video processing of the RAX500.

  • Max. 500 m extremely robust camera cable

  • Meter counter

  • Integrated, adjustable deflection pulley

  • Continuous brake

  • Vertical/horizontal operation

  • Radio remote control

  • Winding support

 

Cameras

iPEK cameras are characterized by their extremely robust design and the use of premium materials. No matter if a simple axial camera or a model with fish-eye lens or a system equipped with 120x zoom and endless rotation: you can customize the iPEK system according to your specific requirements. What all cameras have in common is their reliability in terms of best inspection results, longevity and a high degree of compatibility.

RCX90 

P&T ZOOM CAMERA Ø 146 MM - 2000 MM

The pan & tilt head camera RCX90 has a 10 x optical zoom and additionally a 12 x digital zoom camera module. The camera has a pan range of ±135° and an endless rotation range.

  • CMOS-color camera

  • Rotation and pan unit integrated in the camera head

  • Backwards view into the connecting pipe lines when inspecting in water flow direction

  • Strong homogeneous illumination through adjustable LED illumination

  • Impact-resistant lighting ring with integrated bumper made
    of stainless steel

  • Scratchproof, replaceable camera front glass (Sapphireglas)

  • Upright picture (in axial view)

  • Integrated laser to measure the diameter and crack width

  • High Resolution

  • Large angle of view

  • Focus mode

  • Compatible with the ROVION inspection System

Optionally available as EX version

PTP70II 

P&T HEAD CAMERA Ø 79 MM - 300 MM

The pan & tilt head camera PTP70II features endless rotation and a panning range of  -20° up to +110°. The pan & tilt camera PTP70II  is connected to a crawler with the crawler adapter RCC70 or to the AGILIOS pan & tilt push camera system by means of the spring connection SP70.

  • CMOS color camera

  • Rotation and pan unit integrated in the camera head

  • Endless rotation range

  • Powerful homogeneous illumination through LED lighting

  • Light control from 0 - 100%

  • Impact-resistant lighting ring with integrated, ex-
    changeable bumper

  • Upright picture

  • Integrated laser to determine diameters and crack widths

  • Location transmitter can be activated

  • High sensitivity to light

  • High resolution

  • Indication of the panning and rotation angle on the 
    GUI of the VC200/ DCX5000 and in the text generator (VC200)

  • Internal pressure display via system status VC200 / DCX5000

  • With spring connection SP70 compatible to the AGILIOS pan & tilt push camera system

  • With crawler adapter RCC70 compatible to the ROVION inspection system

  • Interruption-free panning of pipe connections

Optionally available as EX version

PTC50

P&T CAMERA Ø 100 MM - 300 MM

Pan & tilt Camera PTC50 for the ROVION inspection system. The application area starts at DN 100. The camera disposes of an endless rotation and a large panning range. The camera is characterized by its high-grade and robust design and excellent optical qualities.

  • CMOS color camera

  • Rotation and pan unit integrated in the camera head

  • Backwards view into the connecting pipelines when 
    inspecting IN water flow direction

  • Strong homogeneous illumination through adjustable 
    LED illumination

  • Impact-resistant lighting ring with integrated bumper 
    made of stainless steel

  • Scratchproof, replaceable camera front glass

  • Upright picture (in axial view)

  • Integrated laser to measure the diameter and crack widths

  • High resolution

  • Large angle of view

  • Focus mode

RAC50

RAC50 - AXIAL CAMERA Ø 100 MM - 200 MM

The RAC50 Axial camera is the smallest camera model built for the use in narrow pipe systems. It is designed for the use on both crawlers, the RX95 and the RX130.

  • CMOS color camera

  • Powerful homogenous illumination through LED lighting

  • Light control from 0 - 100%

  • Impact-resistant lighting ring

  • High sensitivity to light

  • Application area DN 100 - DN 200

  • Pipe bend mobility from DN150 (in combination with RX95)

  • Stainless steel housing with compact design

Digisewer DSIII

FISHEYE CAMERA Ø 200 MM - 1000 MM

For your ROVION system also a special high-resolution CCD color camera with a fisheye lens is available. This DIGISEWER camera DSIII offers you the possibility to create developed views of the pipe systems to be inspected.

  • CCD color camera

  • Powerful homogenous illumination through LED lighting

  • Brightness adjustable in 10 steps

  • 190° lens

  • Connection for laser ring for deformation measurement 

SVC110

BOREHOLE CAMERA & ROTATION UNIT Ø 150 MM - 500 MM

The SVC110 is a high-resolution CCD color camera with pan & tilt head - its panning range in both directions is 135° and due to a slip ring endless rotation is possible. Additionally, the pan & tilt camera designed specifically for the borehole camera system has a 10x optical and a 4x digital zoom.

  • CCD color camera

  • 10x optical / 4x digital zoom

  • Endless rotation range

  • Panning range +/- 135°

  • Powerful homogenous illumination through LED lighting

  • Light control from 0 - 100%

  • Impact-resistant lighting ring

  • Integrated laser to determine crack widths

  • Inspection depth up to max. 500 m

  • Auxiliary light with 4 manually adjustable halogen lamps

  • Compatible with cable reel RAX500

Push Cameras

 

AGILIOS push camera system

 

POWERFUL AND MANEUVERABLE WITH HIGH PIPE BEND MOBILITY 

 

The AGILIOS™ pan & tilt push camera system consists of a coiler with a reinforced, yet flexible push rod of up to 90 m length, two control panels, various axial cameras and one pan & tilt head camera.

 

Depending on the application area and purpose there are two multi-functional and mobile VISIONCONTROL control panels - version VC200 or version VC50 - that can be used.


The extremely robust VC50 is the control unit suitable for inspections under harsh environmental conditions and the VC200 allows the user to carry out inspections according to predefined standards.

Coiler for the push camera inspection system AGILIOS™, version AR90II. It is used for inspections of property drainage systems and their connecting pipes leading to the main sewer but also for the inspection of main sewer pipes. Due to its extremely robust and splash proof construction the coiler is eminently suitable for the use under harsh conditions and in all weathers. The maximum length of the rod is 90 m.

Coiler AR9011

  • Extremely robust and splash-proof for the use under harsh conditions

  • Easy transport through large all-terrain wheels

  • Space-saving storage through removable wheels

  • Operation in vertical and horizontal position of the coiler possible

  • Portable use through battery operation

  • Integrated racks for two exchange batteries

  • Automatic switching from battery 1 to battery 2

  • Battery charging through external power supply

  • Mains operation (optional) possible

  • Extremely robust, yet fl exible push rod

  • Meter counter

  • Analog Video OUT interface

  • Reel brake

  • Rotatable and pivoting control panel mounting for flexible
    adjustment of the control panels

  • Reflectors for greater visibitily for inspection work
    in nocturnal traffic

  • Compatible with the control panels VC200 and VC50

     

Downnload the latest

AGILIOS Sales leaflet

 

The push camera system AGILIOS™ is designed for inspection of duct and pipe systems with pipe diameters starting at DN 50. The maximum length of the push rod is 90 m. In combination with the mobile control panel VC200 an inspection according to predefined standards can be carried out.

Downnload the latest

AR901 Sales leaflet

 

  • Multi-functional, portable operator panel VC200

  • Inspection according to predefined standards

  • Extremely robust, yet flexible push rod

  • Meter counter

  • Swivel arm to mount the mobile control panel VC200

  • Mains or battery operation possible (optional)

  • Side bag for storing the mobile control panel VC200, power cable and battery pack

     

     

     

     

     

     

     

     

     

Technical Camera Services Limited -  Drumnacarta, Snugboro, Castlebar, Co. Mayo, F23 KW90 - Reg No: 557936