top of page
Pipe & channel cleaning nozzles
Tier 4 - AquaTeq® High-End

1983 Malmö Municipality in Sweden got a contribution from The Swedish Environmental Protection Agency to perform scientific tests to set fort what was the important factors when it comes to cost efficient pipe cleaning.

One of the founders of AquaTeq®, Bo Larsson, who was a close friend and speaking partner with Malmö, was invited to participate.

Two pipes were built above ground with lengths of 80 meters in the size of 225 mm (9”) and 400 mm (16”). For each test the lines where field with 400 kg sand, gravel and stones divided over the length of the pipe. Different nozzles were borrowed from all over Europe to determine if the nozzle design had an impact on the cleaning time and total water consumption.

This was the first time the Tier 4 - AquaTeq® High-End design was introduced and tested. The JAWS® was born.

AquaTeq® High-End cleaning nozzles have an advanced water conductive design and are equipped with replaceable jet orifices for easy adaptation to different pump capacities. Compared with Tier 3 - High Efficient, Tier 4 - AquaTeq® High-End nozzles have double efficiency in terms of both total water consumption and time used. This will greatly affect overall fuel consumption and environmental impact.

The JAWS®nozzle has been the no. 1 cleaning nozzle worldwide for many years since the live test. The past 10-15 years we have added the JAWS®RC, BL SWIPER®, C-RAY®, MANTA® and will shortly introduce the SWEAGLE® in the Tier 4 group of nozzles.


Adjustable channel cleaning sled



Special developed sled for efficient cleaning of larger storm and sewer/drain lines.
One or two jetting trucks can be connected together with 2 or 3 cleaning nozzles, depending on working assignment.

Nozzles are not included.

Technical data

Connection1 x 1 1/4", 2 x 1 1/4"

Other informationL= 1657 mm, w= 1500 - 3100 mm, h= 440 - 615 mm

Weight75 kg


BL Sweep


BL SWIPER® BLACK is the smallest nozzle in the BL SWIPER® family and is recommended for pipe sizes from 100 mm up to 250 mm (4”-10”), depending on available water flow rate. The BL SWIPER® BLACK is designed to work with clean water.

The BL SWIPER® cleaning nozzles are developed for maximum cleaning power of sewers and storm water pipes with a construction made to optimize the cleaning effect by using the waterflow from the high-pressure pump together with the jet streams, created through the nozzle design. The water flow, through the pressure in the jets, creates a jet stream and the jet streams create increased moving power through several channels in the nozzle. The total force generated by the nozzle, air and water force, depending on if nozzle work under water or in dry pipe, is used to clean the pipe in a resource saving manner.

Benefits of BL SWIPER®:
• The water/air channels create immoderate force at lower energy level resulting in lower fuel consumption.
• Operate effective already at 30 Bars (450 PSI) pressure at the nozzle.
• Can easily be adapted for effective cleaning in water filled pipes.
• Low total water and energy consumption.
• By operating the BL SWIPER® according to the instructions you save money, wear and tear of the jetting unit and in total lessen the environmental impact.

Technical data


For recyclersNo

Length x diameter90 x 55 mm

Max working pressure400 bar / 5600 psi

Min water flow at 1450 psi20 l/min (5 us gpm)

Pipe dimension4" - 6" (100 - 150 mm)

Rear jets4 x m6

Weight0,28 kg


BL Sweep Green


BL SWIPER® GREEN is recommended for pipe sizes from 150 mm up to 600 mm (6”-24”), depending on the available pump capacity. The BL SWIPER® GREEN is designed to work with clean water.

The unique design of the BL SWIPER® series of pipe cleaning nozzles create the highest power at the lowest energy demand. This will decrease cleaning time, total water consumption and tear and wear on your jetting unit.

The effectiveness of a cleaning nozzle can be measured through the travelling time it needs from downstream manhole to upstream manhole. With the same travelling speed, the water jets, when retracting the nozzle, will move material faster and more effective to the downstream manhole. The inner design of the BL SWIPER® ensure long and well gather jets with incomparable cleaning and material moving power.

BL SWIPER® series of nozzles are extremely powerful. Always use extender pipe when possible, preventing nozzle from turning in pipe.

When BL SWIPER® nozzle is travelling up the pipe and getting close to the upstream manhole, slow down the feeding of the hose to prevent nozzle from jumping out of the manhole.

Technical data


For recyclersNo

Length x diameter160 x 112 mm

Max working pressure250 bar / 3500 psi

Min water flow at 1450 psi50 l/min (13 us gpm)

Pipe dimension6" - 20" (150 - 500 mm)

Rear jets4 x 1/8"

Weight1,8 kg

BL SWIPER® Green large



BL SWIPER® GREEN LARGE is recommended for pipe sizes from 300 mm up to 1200 mm (12”-48”), depending on available pump capacity. The BL SWIPER® GREEN LARGE is designed to work with clean water.

To assure the proper choice of BL SWIPER® for your work and your jetting truck specifications, always consult AquaTeq® technical sales staff or AquaTeq® authorized distributor. We put pride in supplying the right product, properly adapted to your truck specifications and your needs. When contacting us always make sure to have information about your high-pressure pump maximal water flowrate and maximal pressure as well as hose size and hose length.

If you are having problems with blowing toilets, we will happy to assist with technical and operating instructions how to work with the BL SWIPER® series of nozzles to avoid this situation. 

Technical data


For recyclersNo

Length x diameter310 x 210 mm

Max working pressure250 bar / 3500 psi

Min water flow at 1450 psi150 l/min (40 us gpm)

Pipe dimension12" - 40" (300 - 1000 mm)

Rear jets6 x 1/8"

Weight6,65 kg


BL Orange Sweiper